TH-01-IP1 Thuraya IP Battery for use with IP and IP+ Portable Satellite Terminal
TH-01-IP1 Thuraya IP+, IP Battery $384.23 Inc. GST
Back to products
TT-01-80415010 Thrane Iridium Sailor SC4150 Handset, Fixed Mount Control
80415010 Sailor SC4150 Handset, Fixed Mount Control $873.37 Inc. GST
406080A-001 Sailor 6080 Wall Mount Tray - Image 1
406080A-001 Sailor 6080 Wall Mount Tray - Image 2
406080A-001 Sailor 6080 Wall Mount Tray - Image 3
Click to enlarge
406080A-001 Sailor 6080 Wall Mount Tray
406080A-001 Sailor 6080 Wall Mount Tray - Image 2
406080A-001 Sailor 6080 Wall Mount Tray - Image 3

406080A-001 Sailor 6080 Wall Mount Tray

SKU: 406080A-001

$296.15 Inc. GST

sailor_6081_psu_and_charger_lo.pdf Sailor-6080-Power-Supply_INSTALLATION-MANUAL.pdf

406080A-001 Sailor 6080 Wall Mount Tray is compatible with the 6080 Power Supply unit only.

The 406080A-001 Tray mounts the SAILOR 6080 AC/DC Power Supply on its own as a single unit, or you can daisy-chain and stack up to 3(three) of the 6080 units.

The 6080 AC/DC Power Supply can also be fitted in a 19inch rack mount.

Provides IP X2 rating for the Power Supply when mounted vertically on a wall.

WHATS IN THE BOX? 406080A-001

  • 1x Wall Mounting Tray
  • 1x Cable-relief bracket, heavy duty
  • 1x Mounting Hardware Pack

Optional accessories – NOT included in this pack
The following optional accessories are available and can be ordered:
• Part# 406080A-001, Wall Mounting Tray (Mounting and cable-relief bracket, heavy duty)
• Part# 406080A-002, 4(four) mounting bolts for mounting 2pcs 6080 AC/DC Power Supply units, M6X100 mm, DIN912 Unbrako
• Part# 406080A-003, 4(four) mounting bolts for mounting 3pcs+ 6080 AC/DC Power Supply units, M6X140 mm, DIN912 Unbrako

The 6080 AC/DC Power Supply can deliver 300 W output power on average with a peak of 370 W for a minimum of 2 minutes.
The connector panel is protected by a transparent lid.
Use this tray To secure an installation with heavy cables.
When mounted vertically the AC/DC Power Supply fulfills IP32 in areas with more than 42 V and IP22 in other areas.
This means that the unit is protected against the intrusion of solid objects (including body parts like fingers), dust, water etc.
When more power is needed than one power supply can give, i.e. 300 W, you can stack up to three power supplies on top of each other and connect them.
When stacking 2 or 3 units the load on each of the units is automatically balanced among the units.

Stacking multiple units
You can mount up to three AC/DC Power Supply units in a vertical (recommended to use the Wall Mounting Tray and cable-relief bracket, heavy duty, order number: Part# 406080A-001) or horizontal position.
When mounted in a vertical position, with the connector panel pointing downwards, the unit fulfills IP32 in areas with more than 42 V and IP22 in other areas.
The mounting holes in the AC/DC Power Supply are designed in such a way that units fit nicely on top of each other when being stacked.
IMPORTANT NOTE
To ensure adequate cooling of the AC/DC Power Supplies an unobstructed space of minimum 5 cm must be maintained around all sides of the group of units (except between the units and the bottom side).

Brand

Sailor