Satellite World Store Australia » Products https://www.satelliteworldstore.com.au Satellite Phones And Modems Tue, 31 Oct 2017 21:22:55 +0000 en-AU hourly 1 Iridium Aero Technologies AT1621-12B Large Patch Antenna, same as old Motorola part SAF5340B https://www.satelliteworldstore.com.au/product/ir-01-at1621-12b-iridium-antenna-large-patch-magnetic-mount-with-5-0m-16-4ft-fixed-cable-tail-old-motorola-part-saf5340b-same-as-beam-part-rst715/ https://www.satelliteworldstore.com.au/product/ir-01-at1621-12b-iridium-antenna-large-patch-magnetic-mount-with-5-0m-16-4ft-fixed-cable-tail-old-motorola-part-saf5340b-same-as-beam-part-rst715/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/ir-01-at1621-12b-iridium-antenna-large-patch-magnetic-mount-with-5-0m16-4ft-fixed-cable-tail-old-motorola-part-saf5340b-same-as-beam-part-rst715/ IR-01-AT1621-12B Mobile Permanent Mount Antenna, Iridium Low Profile Patch for vehicle, or marine use
The magnetic mount of the AT1621-12 Iridium antenna allows for easy transfer between vehicles or assets.
Ideal for any hi-performance low profile applications.
Versatile, larger antenna that delivers improved reception over the standard portable auxiliary antenna.
Features a generous 5.0m(197in) cable tail length.
Note: This is a higher gain, yet still low profile antenna for your 9575 Extreme, 9555, 9505A, etc.

The post Iridium Aero Technologies AT1621-12B Large Patch Antenna, same as old Motorola part SAF5340B appeared first on Satellite World Store Australia.

]]> IR-01-AT1621-12B Mobile Magnetic Mount Antenna
This Iridium-frequency antenna (AT1621-5) is designed for land/mobile applications and will work with both voice and data communications systems.
Mounting Profile
Ground Plane requirement is 260sqcm(40sqin) of metallic surface, ie. position near as centre to vehicle roof as possible.
Attaches to your phone ONLY via the Iridium antenna adapter as in the below guide.
Physical
Diameter: 8.966mm(3.53in)
Height: 21.08mm (0.83in)
Weight: 283g(10oz)
Operating Temperature: -40°C to +70°C(-40°F to +158°)
Technical
Cable Type: LMR240
Cable length: 5.0m(197in)
Connector: TNC-Male
Impedance: 50 OHMS
VSWR: less than 2:1
Iridium Frequency: 1616 – 1625.5 MHz
Polarization: Right Hand Circular
Direction: Omnidirectional
Axial Ratio: 4 dB Max
Iridium Network Certified Product
RoHS compliant
Made in USA
Manufacturer: Aero Technologies

COMPATIBILITY
Antenna Adapter is required: for 9575 Extreme use part# IR-01-H3AA0011
Antenna Adapter is required: for 9555 use part# IR-01-H2AA0801
Antenna Adapter is required: for 9505A, 9505 and 9500 use part# IR-01-AAA0601

The post Iridium Aero Technologies AT1621-12B Large Patch Antenna, same as old Motorola part SAF5340B appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/ir-01-at1621-12b-iridium-antenna-large-patch-magnetic-mount-with-5-0m-16-4ft-fixed-cable-tail-old-motorola-part-saf5340b-same-as-beam-part-rst715/feed/ 0 Iridium Aero Technologies Bull Bar Antenna with 5.0m (16.4ft) fixed cable tail, same as Beam RST714 https://www.satelliteworldstore.com.au/product/at1621-15-iridium-by-aero-technologies-antenna-bull-bar-whip-mount-with-5-0m-16-4ft-fixed-cable-tail-same-as-beam-rst714/ https://www.satelliteworldstore.com.au/product/at1621-15-iridium-by-aero-technologies-antenna-bull-bar-whip-mount-with-5-0m-16-4ft-fixed-cable-tail-same-as-beam-rst714/#comments Fri, 02 Aug 2013 17:06:00 +0000 http://satelliteworldstore.com.au//product/at1621-15-iridium-by-aero-technologies-antenna-bull-bar-whip-mount-with-5-0m-16-4ft-fixed-cable-tail-same-as-beam-rst714/ AT1621-15 IRIDIUM by Aero Technologies, Bull Bar Whip Antenna
High Profile is ideal for use on Cars, Buses, SUV's, Trucks and Heavy Transport or Earth Moving Equipment.
This antenna cannot be easily damaged by branches, birds, or other obstacles impacting a Rigid Antenna.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Made by Aero Technologies, CA USA.

The post Iridium Aero Technologies Bull Bar Antenna with 5.0m (16.4ft) fixed cable tail, same as Beam RST714 appeared first on Satellite World Store Australia.

]]> RST714 Antenna
This is a Whip Profile Antenna, is designed to provide high performance and significantly exceeds the antenna performance that is included with the handset.
Allows the SatPhone Handset or Iridium Terminal to be used inside any Vehicle, Vessel or Fixed Building with raised mounting profile above obstructions .
Antenna Cable Basics: 5.0m(16.4ft) base exit Antenna cable tail
Molded Radome mounted on a flexible Polymer pole that will “whip” upon contacting or being impacted by obstacles at speed and not break.
Ideal for use on Cars, Buses, SUV’s, Trucks and Heavy Transport or Earth Moving Equipment.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Overall Size: 720mm(28.8in), being Radome 166x25mm(6.6×1.0in), Pole 454x12mm)18.1×0.5in), Spring Base 100x25mm(4.0×1.0in)
Weight: 566g(20oz)
Mounting Bolt Size: 1x 1/18 threaded
Mounting Hole Size: 17.0mm Dia
Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Aero Technologies Bull Bar Antenna with 5.0m (16.4ft) fixed cable tail, same as Beam RST714 appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/at1621-15-iridium-by-aero-technologies-antenna-bull-bar-whip-mount-with-5-0m-16-4ft-fixed-cable-tail-same-as-beam-rst714/feed/ 0 Iridium Beam RST075 Dual Mode Magnetic Mount Antenna, 6.0m(19.7ft) cable kit https://www.satelliteworldstore.com.au/product/rst705-iridium-beam-dual-mode-antenna-low-profile-patch-magnetic-mount-with-fixed-6-0m-19-7ft-cable-tails/ https://www.satelliteworldstore.com.au/product/rst705-iridium-beam-dual-mode-antenna-low-profile-patch-magnetic-mount-with-fixed-6-0m-19-7ft-cable-tails/#comments Sat, 05 May 2012 03:29:00 +0000 http://satelliteworldstore.com.au//product/rst705-iridium-beam-dual-mode-antenna-low-profile-patch-magnetic-mount-with-fixed-6-0m-19-7ft-cable-tails/ RST705 Dual Mode Antenna, IRIDIUM and GPS Magnetic Mount
With the Magnetic mount, the antenna is very easy to install and move from asset to asset and doesn’t require any holes to be drilled for fitting.
Included is 6m of both Iridium & GPS antenna cable, making the RST705 is a very cost effective solution.
This Low Profile is ideal for use on Cars, Buses, SUV's, Trucks and Heavy Transport or Earth Moving Equipment.
Designed to work with Beam tracking products like LeoTRAK and can work with other Iridium / GPS based devices.

The post Iridium Beam RST075 Dual Mode Magnetic Mount Antenna, 6.0m(19.7ft) cable kit appeared first on Satellite World Store Australia.

]]> RST705 Dual Mode Antenna, IRIDIUM and GPS Magnetic Mount
Iridium and GPS Mag Mount Antenna (RST705) is designed for Vehicle / Land based applications.
RST705 Mag Mount antenna is designed to be very low profile.
This antenna cannot be easily damaged by branches, birds, or other obstacles impacting a Rigid Antenna.
Made by Beam.
Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Beam RST075 Dual Mode Magnetic Mount Antenna, 6.0m(19.7ft) cable kit appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst705-iridium-beam-dual-mode-antenna-low-profile-patch-magnetic-mount-with-fixed-6-0m-19-7ft-cable-tails/feed/ 0 iridium Beam RST702 Dual Mode Antenna, Threaded Pipe Mount https://www.satelliteworldstore.com.au/product/rst702-iridium-beam-dual-mode-antenna-low-profile-threaded-pipe-fixed-mount/ https://www.satelliteworldstore.com.au/product/rst702-iridium-beam-dual-mode-antenna-low-profile-threaded-pipe-fixed-mount/#comments Sun, 03 Nov 2013 17:35:00 +0000 http://satelliteworldstore.com.au//product/rst702-iridium-beam-dual-mode-antenna-low-profile-threaded-pipe-fixed-mount/ RST702 IRIDIUM Beam Dual Mode Antenna, Low Profile, Fixed Mount
Beam RST702 dual mode Iridium & GPS antenna, designed predominantly for maritime applications.
The antenna is supplied complete with a PVC pipe, 30cm (11.8inches) that enables it to be securely mounted without the connectors being exposed to the environment.
The antenna is fitted with an SMA female connector for GPS and a SMA for Iridium and will work with all Beam tracking products or other Iridium / GPS based devices.
Compatible with all Iridium and L1 GPS devices

The post iridium Beam RST702 Dual Mode Antenna, Threaded Pipe Mount appeared first on Satellite World Store Australia.

]]> RST702 IRIDIUM Beam Dual Mode Antenna
Beam RST702 dual mode patch antenna is fitted with an SMA female connector for GPS and a TNC for Iridium and will work with all Beam tracking products or other Iridium / GPS based devices.
Applications
. Fishing Vessels
. Oil and Gas Offshore Platforms
. Yachts and Boats

Accessory Options NOT included – available upon order
Iridium Antenna Cable
. RST932 – Beam 6m (20 feet) LMR240 Iridium antenna cable kit.
. RST933 – Beam 12m (39 feet) LMR240 / LMR 400 Iridium antenna cable kit.
GPS Antenna Cables
. RST942 – Beam 6m (20 feet) LMR195 GPS antenna cable kit.
. RST929 – Beam 9m (30 feet) LMR195 GPS antenna cable kit
. RST923 – Beam 12m (39 feet) LMR195 GPS antenna cable kit.
Additional lengths available upon request

Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post iridium Beam RST702 Dual Mode Antenna, Threaded Pipe Mount appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst702-iridium-beam-dual-mode-antenna-low-profile-threaded-pipe-fixed-mount/feed/ 0 iridium Beam RST703 Dual Mode Antenna https://www.satelliteworldstore.com.au/product/rst703-iridium-beam-antenna-low-profile-fixed-mount/ https://www.satelliteworldstore.com.au/product/rst703-iridium-beam-antenna-low-profile-fixed-mount/#comments Sun, 03 Nov 2013 15:55:00 +0000 http://satelliteworldstore.com.au//product/rst703-iridium-beam-dual-mode-antenna-low-profile-patch-fixed-mount/ RST703 IRIDIUM Beam Dual Mode Antenna, Low Profile Patch, Fixed Mount
Beam RST703 dual mode Iridium & GPS patch antenna, designed predominantly for land and asset monitoring applications.
The RST703 dual mode patch antenna is supplied complete with bulkhead mount that enables it to be securely mounted without the connectors being exposed to the environment.
Compatible with all Iridium and L1 GPS devices

The post iridium Beam RST703 Dual Mode Antenna appeared first on Satellite World Store Australia.

]]> RST703 IRIDIUM Beam Dual Mode Antenna
Beam RST703 dual mode patch antenna is fitted with an SMA female connector for GPS and a TNC for Iridium and will work with all Beam tracking products or other Iridium / GPS based devices.
Applications
. Cars
. Trucks
. Boats

Accessory Options NOT included – available upon order
Iridium Antenna Cable
. RST932 – Beam 6m (20 feet) LMR240 Iridium antenna cable kit.
. RST933 – Beam 12m (39 feet) LMR240 / LMR 400 Iridium antenna cable kit.
GPS Antenna Cables
. RST942 – Beam 6m (20 feet) LMR195 GPS antenna cable kit.
. RST929 – Beam 9m (30 feet) LMR195 GPS antenna cable kit
. RST923 – Beam 12m (39 feet) LMR195 GPS antenna cable kit.
Additional lengths available upon request


Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post iridium Beam RST703 Dual Mode Antenna appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst703-iridium-beam-antenna-low-profile-fixed-mount/feed/ 0 Iridium Beam RST704 Dual Mode Antenna, Aero TSO approval C-144 https://www.satelliteworldstore.com.au/product/rst704-iridium-beam-antenna-low-profile-fixed-mount-aero-tso-approval-c-144/ https://www.satelliteworldstore.com.au/product/rst704-iridium-beam-antenna-low-profile-fixed-mount-aero-tso-approval-c-144/#comments Sun, 03 Nov 2013 16:51:00 +0000 http://satelliteworldstore.com.au//product/rst704-iridium-beam-dual-mode-antenna-low-profile-fixed-mount-aero-tso-approval-c-144/ RST704 IRIDIUM Beam Dual Mode Antenna, Low Profile Fixed Mount, Aero TSO approval C-144
Beam RST704 TSO Aero Approved dual mode Iridium & GPS patch antenna, designed for aero applications.
The RST704 dual mode patch Aero antenna is supplied complete with bulkhead mount that enables it to be securely mounted without the connectors being exposed to the environment.
Compatible with all Iridium and L1 GPS devices

The post Iridium Beam RST704 Dual Mode Antenna, Aero TSO approval C-144 appeared first on Satellite World Store Australia.

]]> RST704 IRIDIUM Beam Antenna
Beam RST704 Dual mode patch antenna is fitted with an SMA female connector for GPS and a TNC for Iridium and will work with all Beam tracking products or other Iridium / GPS based devices.
Designed to be very low profile & TSO approval C-144.
Applications
. Fixed Wing, and Helicopter Aero Applications
Also for
. Cars
. Trucks
. Boats

Accessory Options NOT included – available upon order
Iridium Antenna Cable
. RST932 – Beam 6m (20 feet) LMR240 Iridium antenna cable kit.
. RST933 – Beam 12m (39 feet) LMR240 / LMR 400 Iridium antenna cable kit.
GPS Antenna Cables
. RST942 – Beam 6m (20 feet) LMR195 GPS antenna cable kit.
. RST929 – Beam 9m (30 feet) LMR195 GPS antenna cable kit
. RST923 – Beam 12m (39 feet) LMR195 GPS antenna cable kit.
Additional lengths available upon request


Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Beam RST704 Dual Mode Antenna, Aero TSO approval C-144 appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst704-iridium-beam-antenna-low-profile-fixed-mount-aero-tso-approval-c-144/feed/ 0 Iridium Beam RST706 Bull Bar Antenna, Dual Mode, 5.0m(16.4ft) fixed cable kit https://www.satelliteworldstore.com.au/product/rst706-antenna-helix-dual-mode-iridium-and-gps-satellite-by-beam-bull-bar-whip-with-2x-5-0m-16-4ft-fixed-cable-tails/ https://www.satelliteworldstore.com.au/product/rst706-antenna-helix-dual-mode-iridium-and-gps-satellite-by-beam-bull-bar-whip-with-2x-5-0m-16-4ft-fixed-cable-tails/#comments Tue, 03 Jan 2012 15:23:00 +0000 http://satelliteworldstore.com.au//product/rst706-antenna-helix-dual-mode-iridium-and-gps-satellite-by-beam-bull-bar-whip-with-2x-5-0m-16-4ft-fixed-cable-tails/ RST706 Antenna, Dual Mode IRIDIUM and GPS by BEAM
High Profile is ideal for use on Cars, Buses, SUV's, Trucks and Heavy Transport or Earth Moving Equipment.
This antenna cannot be easily damaged by branches, birds, or other obstacles impacting a Rigid Antenna.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Made by Beam.

The post Iridium Beam RST706 Bull Bar Antenna, Dual Mode, 5.0m(16.4ft) fixed cable kit appeared first on Satellite World Store Australia.

]]> RST706 Antenna, Dual Mode GPS and IRIDIUM
This is a Whip Profile Antenna, is designed to provide high performance.
Allows the GPS Device and SatPhone Handset or Iridium Terminal to be used inside any Vehicle, Vessel or Fixed Building with raised mounting profile .
Antenna Cable Basics: 2x 5.0m(16.4ft) base exit Antenna tail cables
Mounted on a Flexible Polymer Pole that will “whip” upon contacting or being impacted by obstacles at speed and not break.
Ideal for use on Cars, SUV’s, Trucks and Heavy Transport or Earth Moving Equipment.
This Antenna cannot be easily damaged by branches, birds, or other obstacles impacting a Rigid Antenna
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Overall Size: 720mm(28.8in), being Radome 166x25mm(6.6×1.0in), Pole 454x12mm)18.1×0.5in), Spring Base 100x25mm(4.0×1.0in)
Weight: 566g(20oz)
Mounting Bolt Size: 1x 1/18 threaded
Mounting Hole Size: 17.0mm Dia.
Compatible with all GPS and Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Beam RST706 Bull Bar Antenna, Dual Mode, 5.0m(16.4ft) fixed cable kit appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst706-antenna-helix-dual-mode-iridium-and-gps-satellite-by-beam-bull-bar-whip-with-2x-5-0m-16-4ft-fixed-cable-tails/feed/ 0 Iridium Beam RST710 Helix Antenna, same as Aero Technologies part AT1621-142W https://www.satelliteworldstore.com.au/product/rst710-iridium-by-beam-helix-mast-mount-antenna-kit-same-as-aero-technologies-part-at1621-142w/ https://www.satelliteworldstore.com.au/product/rst710-iridium-by-beam-helix-mast-mount-antenna-kit-same-as-aero-technologies-part-at1621-142w/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/rst710-iridium-by-beam-helix-mast-mount-antenna-kit-same-as-aero-technologies-part-at1621-142w/ RST710 IRIDIUM by Beam Antenna Kit, same as Aero Technologies part AT1621-142W
Iridium Pole Mount Antenna RST710 is designed for Maritime based applications.
Designed to work with Beam Iridium products and will work with any other Iridium based devices.
Cable is purchased separately, and NOT included in this antenna kit

The post Iridium Beam RST710 Helix Antenna, same as Aero Technologies part AT1621-142W appeared first on Satellite World Store Australia.

]]> RST710
Iridium Helix Antenna (RST710) is designed for Fixed Marine and also suitable for Remote Building applications.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Made by Beam.
Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Beam RST710 Helix Antenna, same as Aero Technologies part AT1621-142W appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst710-iridium-by-beam-helix-mast-mount-antenna-kit-same-as-aero-technologies-part-at1621-142w/feed/ 0 Iridium Beam RST714 Bull Bar Antenna, same as Aero Technologies part AT1621-15 https://www.satelliteworldstore.com.au/product/rst714-iridium-by-beam-bull-bar-whip-antenna-with-5-0m-16-4ft-fixed-cable-tail-same-as-aero-technologies-part-at1621-15/ https://www.satelliteworldstore.com.au/product/rst714-iridium-by-beam-bull-bar-whip-antenna-with-5-0m-16-4ft-fixed-cable-tail-same-as-aero-technologies-part-at1621-15/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/rst714-iridium-by-beam-bull-bar-whip-antenna-with-5-0m-16-4ft-fixed-cable-tail-same-as-aero-technologies-part-at1621-15/ RST714 Antenna, IRIDIUM by BEAM, Whip Antenna with 5.0m(16.4ft) fixed cable tail
High Profile is ideal for use on Cars, Buses, SUV's, Trucks and Heavy Transport or Earth Moving Equipment.
This antenna cannot be easily damaged by branches, birds, or other obstacles impacting a Rigid Antenna.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Made by Beam.

The post Iridium Beam RST714 Bull Bar Antenna, same as Aero Technologies part AT1621-15 appeared first on Satellite World Store Australia.

]]> RST714 Antenna
This is a Whip Profile Antenna, is designed to provide high performance and significantly exceeds the antenna performance that is included with the handset.
Allows the SatPhone Handset or Iridium Terminal to be used inside any Vehicle, Vessel or Fixed Building with raised mounting profile above obstructions .
Antenna Cable Basics: 5.0m(16.4ft) base exit Antenna cable tail
Molded Radome mounted on a flexible Polymer pole that will “whip” upon contacting or being impacted by obstacles at speed and not break.
Ideal for use on Cars, Buses, SUV’s, Trucks and Heavy Transport or Earth Moving Equipment.
Helix design compensates for Angled Tilt, Sway and Rocking motion environments.
Overall Size: 720mm(28.8in), being Radome 166x25mm(6.6×1.0in), Pole 454x12mm)18.1×0.5in), Spring Base 100x25mm(4.0×1.0in)
Weight: 566g(20oz)
Mounting Bolt Size: 1x 1/18 threaded
Mounting Hole Size: 17.0mm Dia
Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post Iridium Beam RST714 Bull Bar Antenna, same as Aero Technologies part AT1621-15 appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst714-iridium-by-beam-bull-bar-whip-antenna-with-5-0m-16-4ft-fixed-cable-tail-same-as-aero-technologies-part-at1621-15/feed/ 0 iridium Beam RST715 Antenna, Magnetic Mount with 5m(16.4ft) cable https://www.satelliteworldstore.com.au/product/rst715-iridium-beam-antenna-low-profile-patch-magnetic-mount-with-5-0m-196in-fixed-cable/ https://www.satelliteworldstore.com.au/product/rst715-iridium-beam-antenna-low-profile-patch-magnetic-mount-with-5-0m-196in-fixed-cable/#comments Thu, 03 Oct 2013 16:04:00 +0000 http://satelliteworldstore.com.au//product/rst715-iridium-beam-antenna-low-profile-patch-magnetic-mount-with-5-0m196in-fixed-cable/ RST715 IRIDIUM Beam Patch Antenna, Magnetic Mount with 5.0m(196in) fixed cable
Iridium antenna (RST715) is designed for Land based applications.
Designed to work with Beam Iridium products and will work with other Iridium based devices.
Antenna cable is included and attached to the antenna - CANNOT be extended.
Compatible with all Iridium devices

The post iridium Beam RST715 Antenna, Magnetic Mount with 5m(16.4ft) cable appeared first on Satellite World Store Australia.

]]> RST715 IRIDIUM Beam Patch Antenna
Ideal for fast temporary applications and easy vehicle transfer
Applications
. Cars
. Trucks

Design
. High quality enclosure
. Temp range: -40 to +85°(Fahrenheit -40° to 185°)
. Magnetic mounting
. TNC-Male connector
. Black
. Omni Directional

Compatible with all Iridium Satellite Products by Telstra, Beam, Pivotel, AST SatCom and other 3rd party suppliers

The post iridium Beam RST715 Antenna, Magnetic Mount with 5m(16.4ft) cable appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/rst715-iridium-beam-antenna-low-profile-patch-magnetic-mount-with-5-0m-196in-fixed-cable/feed/ 0