Satellite World Store Australia » Products https://www.satelliteworldstore.com.au Satellite Phones And Modems Tue, 31 Oct 2017 21:22:55 +0000 en-AU hourly 1 SENA Parani cable extension, 15cm https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/ https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/sec-g01r-sena-parani-cable-extension-15cm6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probeewt-6g/ SEC-G01R is a 6in(15cm) SMA-Right Hand Thread Antenna Extension Cable to enable the antenna to be separated or located remotely away from the unit.

The post SENA Parani cable extension, 15cm appeared first on Satellite World Store Australia.

]]> SEC-G01R is a 6in(15cm) 6in/15cm SMA/Left Hand Thread Antenna Extension Cable 15cm to enable the antenna to be separated or located remotely away from the unit.
Use for connecting
USB Adapters: Parani-UD100 and SD1000U, ProBee ZU10 to SAT, DAT, DAT5 Antennas
Serial Adapters: Parani SD1000, SD1100, ProBee ZS10 to SAT, DAT, DAT5 Antennas
Device server: MSP1000 to SAT, DAT, DAT5 Antennas
OEM Module: ESD1000 to SAT, DAT, DAT5 Antennas

The post SENA Parani cable extension, 15cm appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/feed/ 0 SENA Parani RS232 DB9 Null Modem, Female to Male Gender Changer https://www.satelliteworldstore.com.au/product/fm9gd-g01-adapter-sena-null-modem-rs232-db9-female-to-male-gender-changer-for-parani-bluetooth-sd-series-and-zigbee-probee-zs10-serial-adapters-wt-20g/ https://www.satelliteworldstore.com.au/product/fm9gd-g01-adapter-sena-null-modem-rs232-db9-female-to-male-gender-changer-for-parani-bluetooth-sd-series-and-zigbee-probee-zs10-serial-adapters-wt-20g/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/fm9gd-g01-adapter-sena-null-modem-rs232-db9-female-to-male-gender-changer-for-parani-bluetooth-sd-series-and-zigbee-probee-zs10-serial-adapters-wt-20g/ Parani FM9GD-G01 Adapter, DB9 Female to Male Gender Changer is used to connect your ZigBee ZS10, and Parani SD series to external devices requiring a Male pin configuration.

The post SENA Parani RS232 DB9 Null Modem, Female to Male Gender Changer appeared first on Satellite World Store Australia.

]]> Use to connect your ZigBee ZS10, and Parani SD series to external devices requiring a Male pin configuration.

The post SENA Parani RS232 DB9 Null Modem, Female to Male Gender Changer appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/fm9gd-g01-adapter-sena-null-modem-rs232-db9-female-to-male-gender-changer-for-parani-bluetooth-sd-series-and-zigbee-probee-zs10-serial-adapters-wt-20g/feed/ 0 SkyWave 1-wire adapter https://www.satelliteworldstore.com.au/product/st100325-001-skywave-1-wire-adapter/ https://www.satelliteworldstore.com.au/product/st100325-001-skywave-1-wire-adapter/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100325-001-skywave-1-wire-adapter/ ST100325-001 SkyWave 1-wire adapter
Use: This adapter enables interface of Access Devices and Sensors .

The post SkyWave 1-wire adapter appeared first on Satellite World Store Australia.

]]> ST100325-001 SkyWave 1-wire adapter
Use for any device

The post SkyWave 1-wire adapter appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100325-001-skywave-1-wire-adapter/feed/ 0 SkyWave 1-wire adapter, OEM unpackaged https://www.satelliteworldstore.com.au/product/st100326-001-skywave-1-wire-adapter-oem-unpackaged/ https://www.satelliteworldstore.com.au/product/st100326-001-skywave-1-wire-adapter-oem-unpackaged/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100326-001-skywave-1-wire-adapter-oem-unpackaged/ ST100326-001 SkyWave 1-wire adapter, OEM unpackaged
Use: This adapter enables interface of Access Devices and Sensors etc.

The post SkyWave 1-wire adapter, OEM unpackaged appeared first on Satellite World Store Australia.

]]> ST100326-001 SkyWave 1-wire adapter, OEM unpackaged
Use for any device

The post SkyWave 1-wire adapter, OEM unpackaged appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100326-001-skywave-1-wire-adapter-oem-unpackaged/feed/ 0 SkyWave Garmin Development Cable for all IDP Terminals https://www.satelliteworldstore.com.au/product/st100220-001-skywave-garmin-development-cable-for-all-idp-terminals/ https://www.satelliteworldstore.com.au/product/st100220-001-skywave-garmin-development-cable-for-all-idp-terminals/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100220-001-skywave-garmin-development-cable-for-all-idp-terminals/ ST100220-001 SkyWave Garmin Development Cable for all IDP Terminals
Use: This modified cable is to connect the IDP Development Cable to the Garmin PND.

The post SkyWave Garmin Development Cable for all IDP Terminals appeared first on Satellite World Store Australia.

]]> ST100220-001 SkyWave Garmin Development Cable for all IDP Terminals
Enables programming of the Garmin PND to actually send messages via satellite,
>li> The IDP terminal must be located outdoors with a clear view of the sky when connecting.
This product is for Solution Integrators and Developers

The post SkyWave Garmin Development Cable for all IDP Terminals appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100220-001-skywave-garmin-development-cable-for-all-idp-terminals/feed/ 0 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/ https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/ ST100143-001 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable
Use for interfacing IDP-800 to IDP600 Series Satellite terminals

The post Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable appeared first on Satellite World Store Australia.

]]> ST100143-001 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable
Use for interfacing IDP-800 to IDP600 Series Satellite terminals

The post Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/feed/ 0 Skywave IDP-800 and IDP-100 Low Elevation Antenna, side-entry 5.0m cable with SMA-male connector https://www.satelliteworldstore.com.au/product/st901066-asa-skywave-idp-800-and-idp-100-low-elevation-antenna-side-entry-5-0m-cable-with-sma-male-connector/ https://www.satelliteworldstore.com.au/product/st901066-asa-skywave-idp-800-and-idp-100-low-elevation-antenna-side-entry-5-0m-cable-with-sma-male-connector/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st901066-asa-skywave-idp-800-and-idp-100-low-elevation-antenna-side-entry-5-0m-cable-with-sma-male-connector/ ST901066-ASA Skywave IDP-800 and IDP-100 Low Elevation Antenna, side-entry 5.0m cable with SMA-male connector
Use where low elevation performance is required.
Marine applications should use this helix design to compensate for tilt and sway.

The post Skywave IDP-800 and IDP-100 Low Elevation Antenna, side-entry 5.0m cable with SMA-male connector appeared first on Satellite World Store Australia.

]]> ST901066-ASA Skywave IDP-800 and IDP-100 Low Elevation Antenna, side-entry 5.0m cable with SMA-male connector
Ideal for use with the IDP-800 and IDP-100 Satellite terminals.

Specifications
Elevation Angle: +20° to +90° (Integrated or remote antenna); -15° to +90° (Low elevation antenna)
Frequency: Rx: 1525.0 to 1559.0 MHz;, Tx: 1626.5 to 1660.5 MHz
EIRP: 7.0 dBW
Acquisition Time: Hot: 1s; Cold: 29s/30s
Accuracy: 2.5m/4.0m CEP-Horizontal
Sensitivity (Tracking): -162 dBm/-158 dBm
Power
Power Consumption (Typical @12V DC, 22°C):
Average receive: 8.3 mA;
Receive with GPS/GLONASS: 40 mA; Transmit: 0.75 A;
Sleep: 100 μA; Power off: 12 μA

Antenna Ordering Guide:
Helix Antenna, part# ST901066-ASA for Marine and Geographic low elevation land applications
Low Profile, part# ST901065-ASA for general land applications and where is a low profile is required

The post Skywave IDP-800 and IDP-100 Low Elevation Antenna, side-entry 5.0m cable with SMA-male connector appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st901066-asa-skywave-idp-800-and-idp-100-low-elevation-antenna-side-entry-5-0m-cable-with-sma-male-connector/feed/ 0 Skywave IDP-800 and IDP-100 Low Profile Antenna, side-entry 5.0m cable with SMA-male connector https://www.satelliteworldstore.com.au/product/st901065-asa-skywave-idp-800-and-idp-100-low-profile-antenna-side-entry-5-0m-cable-with-sma-male-connector/ https://www.satelliteworldstore.com.au/product/st901065-asa-skywave-idp-800-and-idp-100-low-profile-antenna-side-entry-5-0m-cable-with-sma-male-connector/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st901065-asa-skywave-idp-800-and-idp-100-low-profile-antenna-side-entry-5-0m-cable-with-sma-male-connector/ ST901065-ASA Skywave IDP-800 and IDP-100 Low Profile Antenna, side-entry 5.0m cable with SMA-male connector
Use where low profile clearance and format is required.

The post Skywave IDP-800 and IDP-100 Low Profile Antenna, side-entry 5.0m cable with SMA-male connector appeared first on Satellite World Store Australia.

]]> ST901065-ASA Skywave IDP-800 and IDP-100 Low Profile Antenna, side-entry 5.0m cable with SMA-male connector
Ideal for use with the IDP-800 and IDP-100 Satellite terminals.

Specifications
Elevation Angle: +20° to +90° (Integrated or remote antenna); -15° to +90° (Low elevation antenna)
Frequency: Rx: 1525.0 to 1559.0 MHz;, Tx: 1626.5 to 1660.5 MHz
EIRP: 7.0 dBW
Acquisition Time: Hot: 1s; Cold: 29s/30s
Accuracy: 2.5m/4.0m CEP-Horizontal
Sensitivity (Tracking): -162 dBm/-158 dBm
Power
Power Consumption (Typical @12V DC, 22°C):
Average receive: 8.3 mA;
Receive with GPS/GLONASS: 40 mA; Transmit: 0.75 A;
Sleep: 100 μA; Power off: 12 μA

Antenna Ordering Guide:
Helix Antenna, part# ST901066-ASA for Marine and Geographic low elevation land applications
Low Profile, part# ST901065-ASA for general land applications and where is a low profile is required

The post Skywave IDP-800 and IDP-100 Low Profile Antenna, side-entry 5.0m cable with SMA-male connector appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st901065-asa-skywave-idp-800-and-idp-100-low-profile-antenna-side-entry-5-0m-cable-with-sma-male-connector/feed/ 0 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/ https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/ ST100189-001 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals
Gasket Use: Gasket should be replaced when replacing the batteries to ensure a seal is maintained.
Top Cover Use: Depending on the environment, or external damage from falling debris, trees etc, the top cover can become brittle, or shattered and may be damaged or unserviceable during battery replacement.
This IDP-800 Battery compartment enclosure for NON-rechargeable terminals

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals appeared first on Satellite World Store Australia.

]]> ST100189-001 Skywave IDP-800 Battery compartment sub-assembly for NON-rechargeable terminals
Use for the NON-Rechargeable IDP-800 Satellite terminal series ONLY

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/feed/ 0 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/ https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/ ST100189-002 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargeable terminals
Gasket Use: Gasket should be replaced when replacing the batteries to ensure a seal is maintained.
Top Cover Use: Depending on the environment, or external damage from falling debris, trees etc, the top cover can become brittle, or shattered and may be damaged or unserviceable during battery replacement.
This IDP-800 Battery compartment enclosure for Rechargeable terminals

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals appeared first on Satellite World Store Australia.

]]> ST100189-002 Skywave IDP-800 Battery compartment sub-assembly for Rechargeable terminals
Use for the Rechargeable IDP-800 Satellite terminal series ONLY

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/feed/ 0