Satellite World Store Australia » Products https://www.satelliteworldstore.com.au Satellite Phones And Modems Tue, 31 Oct 2017 21:22:55 +0000 en-AU hourly 1 SENA Parani cable extension, 15cm https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/ https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/sec-g01r-sena-parani-cable-extension-15cm6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probeewt-6g/ SEC-G01R is a 6in(15cm) SMA-Right Hand Thread Antenna Extension Cable to enable the antenna to be separated or located remotely away from the unit.

The post SENA Parani cable extension, 15cm appeared first on Satellite World Store Australia.

]]> SEC-G01R is a 6in(15cm) 6in/15cm SMA/Left Hand Thread Antenna Extension Cable 15cm to enable the antenna to be separated or located remotely away from the unit.
Use for connecting
USB Adapters: Parani-UD100 and SD1000U, ProBee ZU10 to SAT, DAT, DAT5 Antennas
Serial Adapters: Parani SD1000, SD1100, ProBee ZS10 to SAT, DAT, DAT5 Antennas
Device server: MSP1000 to SAT, DAT, DAT5 Antennas
OEM Module: ESD1000 to SAT, DAT, DAT5 Antennas

The post SENA Parani cable extension, 15cm appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/sec-g01r-sena-parani-cable-extension-15cm-6-0in-rp-sma-right-hand-thread-for-parani-bluetooth-and-zigbee-probee-wt-6g/feed/ 0 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/ https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/ ST100143-001 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable
Use for interfacing IDP-800 to IDP600 Series Satellite terminals

The post Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable appeared first on Satellite World Store Australia.

]]> ST100143-001 Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable
Use for interfacing IDP-800 to IDP600 Series Satellite terminals

The post Skywave IDP 800 Series to IDP 600 Series Adaptor, 3m Molded Cable appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100143-001-skywave-idp-800-series-to-idp-600-series-adaptor-3m-molded-cable/feed/ 0 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/ https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/ ST100189-001 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals
Gasket Use: Gasket should be replaced when replacing the batteries to ensure a seal is maintained.
Top Cover Use: Depending on the environment, or external damage from falling debris, trees etc, the top cover can become brittle, or shattered and may be damaged or unserviceable during battery replacement.
This IDP-800 Battery compartment enclosure for NON-rechargeable terminals

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals appeared first on Satellite World Store Australia.

]]> ST100189-001 Skywave IDP-800 Battery compartment sub-assembly for NON-rechargeable terminals
Use for the NON-Rechargeable IDP-800 Satellite terminal series ONLY

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for NON-rechargeable terminals appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100189-001-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-non-rechargeable-terminals/feed/ 0 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/ https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/ ST100189-002 Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargeable terminals
Gasket Use: Gasket should be replaced when replacing the batteries to ensure a seal is maintained.
Top Cover Use: Depending on the environment, or external damage from falling debris, trees etc, the top cover can become brittle, or shattered and may be damaged or unserviceable during battery replacement.
This IDP-800 Battery compartment enclosure for Rechargeable terminals

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals appeared first on Satellite World Store Australia.

]]> ST100189-002 Skywave IDP-800 Battery compartment sub-assembly for Rechargeable terminals
Use for the Rechargeable IDP-800 Satellite terminal series ONLY

The post Skywave IDP-800 Battery compartment Gasket and Cover sub-assembly for Rechargable terminals appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100189-002-skywave-idp-800-battery-compartment-gasket-and-cover-sub-assembly-for-rechargable-terminals/feed/ 0 SkyWave IDP-800 Blunt Cut Cable, 0.5m https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-4/ https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-4/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100165-004-skywave-idp-800-blunt-cut-cable-0-5m/ ST100165-004 SkyWave IDP-800 Blunt Cut Cable, 0.5m
This cable connects the IDP terminal to external power, I/O lines and serial ports.

The post SkyWave IDP-800 Blunt Cut Cable, 0.5m appeared first on Satellite World Store Australia.

]]> ST100165-004 SkyWave IDP-800 Blunt Cut Cable, 0.5m
This is an original spare part.
There are a total of seven pins on this blunt cut cable; two connect the terminal to an RS-232 console serial port, three wires to connect to external I/O lines, and one each for ground
and input voltage.
The cable has an over-molded connector, a floating drain wire that is terminated to ground.
Cable drain wires terminated to ground at IDP terminal connector (PIN 1) refer to the users manual.
Temperature rating: -40°C to +85°C
Ultraviolet rating: UV stabilized

The post SkyWave IDP-800 Blunt Cut Cable, 0.5m appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-4/feed/ 0 SkyWave IDP-800 Blunt Cut Cable, 10m https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m/ https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100165-002-skywave-idp-800-blunt-cut-cable-10m/ ST100165-002 SkyWave IDP-800 Blunt Cut Cable, 10m
This cable connects the IDP terminal to external power, I/O lines and serial ports.

The post SkyWave IDP-800 Blunt Cut Cable, 10m appeared first on Satellite World Store Australia.

]]> ST100165-002 SkyWave IDP-800 Blunt Cut Cable, 10m
This is an original spare part.
There are a total of seven pins on this blunt cut cable; two connect the terminal to an RS-232 console serial port, three wires to connect to external I/O lines, and one each for ground
and input voltage.
The cable has an over-molded connector, a floating drain wire that is terminated to ground.
Cable drain wires terminated to ground at IDP terminal connector (PIN 1) refer to the users manual.
Temperature rating: -40°C to +85°C
Ultraviolet rating: UV stabilized

The post SkyWave IDP-800 Blunt Cut Cable, 10m appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m/feed/ 0 SkyWave IDP-800 Blunt Cut Cable, 15m https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-2/ https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-2/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100165-003-skywave-idp-800-blunt-cut-cable-15m/ ST100165-003 SkyWave IDP-800 Blunt Cut Cable, 15m
This cable connects the IDP terminal to external power, I/O lines and serial ports.

The post SkyWave IDP-800 Blunt Cut Cable, 15m appeared first on Satellite World Store Australia.

]]> ST100165-003 SkyWave IDP-800 Blunt Cut Cable, 15m
This is an original spare part.
There are a total of seven pins on this blunt cut cable; two connect the terminal to an RS-232 console serial port, three wires to connect to external I/O lines, and one each for ground
and input voltage.
The cable has an over-molded connector, a floating drain wire that is terminated to ground.
Cable drain wires terminated to ground at IDP terminal connector (PIN 1) refer to the users manual.
Temperature rating: -40°C to +85°C
Ultraviolet rating: UV stabilized

The post SkyWave IDP-800 Blunt Cut Cable, 15m appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-2/feed/ 0 SkyWave IDP-800 Blunt Cut Cable, 3m https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-3/ https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-3/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100165-005-skywave-idp-800-blunt-cut-cable-3m/ ST100165-005 SkyWave IDP-800 Blunt Cut Cable, 3m
This cable connects the IDP terminal to external power, I/O lines and serial ports.

The post SkyWave IDP-800 Blunt Cut Cable, 3m appeared first on Satellite World Store Australia.

]]> ST100165-005 SkyWave IDP-800 Blunt Cut Cable, 3m
This is an original spare part.
There are a total of seven pins on this blunt cut cable; two connect the terminal to an RS-232 console serial port, three wires to connect to external I/O lines, and one each for ground
and input voltage.
The cable has an over-molded connector, a floating drain wire that is terminated to ground.
Cable drain wires terminated to ground at IDP terminal connector (PIN 1) refer to the users manual.
Temperature rating: -40°C to +85°C
Ultraviolet rating: UV stabilized

The post SkyWave IDP-800 Blunt Cut Cable, 3m appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100165-002-skywave-idp-800-blunt-cut-cable-10m-3/feed/ 0 SkyWave IDP-800 Blunt Cut Cable, 5m https://www.satelliteworldstore.com.au/product/st100165-001-skywave-idp-800-blunt-cut-cable-5m/ https://www.satelliteworldstore.com.au/product/st100165-001-skywave-idp-800-blunt-cut-cable-5m/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100165-001-skywave-idp-800-blunt-cut-cable-5m/ ST100165-001 SkyWave IDP-800 Blunt Cut Cable, 5m
This cable connects the IDP terminal to external power, I/O lines and serial ports.

The post SkyWave IDP-800 Blunt Cut Cable, 5m appeared first on Satellite World Store Australia.

]]> ST100165-001 SkyWave IDP-800 Blunt Cut Cable, 5m
This is an original spare part.
There are a total of seven pins on this blunt cut cable; two connect the terminal to an RS-232 console serial port, three wires to connect to external I/O lines, and one each for ground
and input voltage.
The cable has an over-molded connector, a floating drain wire that is terminated to ground.
Cable drain wires terminated to ground at IDP terminal connector (PIN 1) refer to the users manual.
Temperature rating: -40°C to +85°C
Ultraviolet rating: UV stabilized

The post SkyWave IDP-800 Blunt Cut Cable, 5m appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100165-001-skywave-idp-800-blunt-cut-cable-5m/feed/ 0 Skywave IDP-800 Gasket for battery compartment https://www.satelliteworldstore.com.au/product/st100188-skywave-idp-800-gasket-for-battery-compartment/ https://www.satelliteworldstore.com.au/product/st100188-skywave-idp-800-gasket-for-battery-compartment/#comments Wed, 31 Dec 1969 14:00:00 +0000 http://satelliteworldstore.com.au//product/st100188-skywave-idp-800-gasket-for-battery-compartment/ ST100188 Skywave IDP-800 Gasket for battery compartment
Use: Gasket should be replaced when replacing the batteries to ensure a seal is maintained.

The post Skywave IDP-800 Gasket for battery compartment appeared first on Satellite World Store Australia.

]]> ST100188 Skywave IDP-800 Gasket for battery compartment
Use for the IDP-800 Satellite terminal series ONLY

The post Skywave IDP-800 Gasket for battery compartment appeared first on Satellite World Store Australia.

]]> https://www.satelliteworldstore.com.au/product/st100188-skywave-idp-800-gasket-for-battery-compartment/feed/ 0