Satellite World Store Australia » Products

SkyWave 1-wire adapter

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100325-001 SkyWave 1-wire adapter
Use: This adapter enables interface of Access Devices and Sensors .

The post SkyWave 1-wire adapter appeared first on Satellite World Store Australia.

SkyWave 1-wire adapter, OEM unpackaged

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100326-001 SkyWave 1-wire adapter, OEM unpackaged
Use: This adapter enables interface of Access Devices and Sensors etc.

The post SkyWave 1-wire adapter, OEM unpackaged appeared first on Satellite World Store Australia.

SkyWave Garmin Development Cable for all IDP Terminals

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100220-001 SkyWave Garmin Development Cable for all IDP Terminals
Enables programming of the Garmin PND to actually send messages via satellite,
>li> The IDP terminal must be located outdoors with a clear view of the sky when connecting.
This product is for Solution Integrators and Developers

The post SkyWave Garmin Development Cable for all IDP Terminals appeared first on Satellite World Store Australia.

SkyWave IDP-800 Magnetic Key Fob

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100138 SkyWave IDP-800 Magnetic Key Fob
This is an original spare part.
When to Power off the Terminal
In order to save battery life, remove the power source, including any batteries, from the terminal:
When the terminal is out of satellite coverage for an extended period of time
When the terminal is removed from an asset for storage
Prior to shipping
If the terminal has been powered off it can be powered on in a number of ways:
By inserting batteries (rechargeable or non-rechargeable)
By applying external power
When the power off timer has expired
By using the activation magnet fob and following the instructions below
Hold the activation magnet fob centered on the magnet sensor for 3 seconds and then remove to power on the terminal.
Once the terminal has power, the LED emits a few short flashes.
Refer to the user manual for LED operation information and flash rates.
Note:
It is important that you hold the activation magnet fob on the target for 3 seconds and then remove it, in order to power on the terminal.
The terminal remains off if the magnet fob is in place for more than 10 seconds.

The post SkyWave IDP-800 Magnetic Key Fob appeared first on Satellite World Store Australia.

SkyWave Panic Button Cable, Stripped and tinned, 2.5m

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100254-001 SkyWave Panic Button Cable, Stripped and tinned, 2.5m
Use: This cable is to enable a Panic Button feature for your Cellular Gateway and Satellite Terminals.

The post SkyWave Panic Button Cable, Stripped and tinned, 2.5m appeared first on Satellite World Store Australia.

SkyWave SG-7100 iButton Fob, Driver Operator ID Access

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

OEM100051 SkyWave SG-7100 iButton Fob, Driver Operator ID Access for SG-7100 Cellular Gateways
The 1-Wire iButton Driver ID Fobs are to enable access and Identify the vehicle operator/driver.

The post SkyWave SG-7100 iButton Fob, Driver Operator ID Access appeared first on Satellite World Store Australia.

SkyWave SG-7100 Industrial Serial Expansion Card, RS232 and RS485

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100303-002 SkyWave SG-7100 Industrial Serial Expansion Card, RS232 and RS485
This is an original spare part or upgrade part for the SG-7100

The Industrial Serial expansion card provides:
RS-232 port
921.6 Kb maximum speed
DB9 connector
RS-485 port (2-wire or 4-wire)
921.6 Kb maximum speed
Full duplex or half duplex
5-pin Phoenix connector (MC 1.5/5ST-3.81)
Termination switch to terminate the RS-485 network with a 120 Ohm resistor
Wire selection allows you to use a 2 or 4-wire network

The post SkyWave SG-7100 Industrial Serial Expansion Card, RS232 and RS485 appeared first on Satellite World Store Australia.

SkyWave SG-7100 SIM Card for AMEA, USA, Canada and The Americas

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

OEM100053 SkyWave SG-7100 SIM Card for AMEA, USA, Canada and The Americas
This is as originally provided with your SG-7100 in the AMEA region
NOTE# Order SIM CARD part# OEM100059 for EMEA and APAC Europe, Middle East and Africa, AU/NZ

The post SkyWave SG-7100 SIM Card for AMEA, USA, Canada and The Americas appeared first on Satellite World Store Australia.

SkyWave SG-7100 SIM Card for EMEA-APAC Europe, Middle East, Africa and APAC incl. AU/NZ

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

OEM100059 SkyWave SG-7100 SIM Card for EMEA-APAC Europe, Middle East, Africa and APAC incl. AU/NZ
This is as originally provided with your SG-7100 in the EMEA and APAC regions
NOTE# Order SIM CARD part# OEM100053 for AMEA (US/Canada and the AMERICAS)

The post SkyWave SG-7100 SIM Card for EMEA-APAC Europe, Middle East, Africa and APAC incl. AU/NZ appeared first on Satellite World Store Australia.

SkyWave SG-7100 Simplex Serial Expansion Card, RS232 only

gcw-dev — Wed, 31 Dec 1969 14:00:00 +0000

ST100303-004 SkyWave SG-7100 Simplex Serial Expansion Card, RS232 only
This is an original spare part or upgrade part for the SG-7100

The Simplex Serial expansion card provides:
One single RS-232 port
921.6 Kb maximum speed
DB9 connector

Installation Note for connecting DTE and DCE Devices
The Simplex Serial expansion card is a DCE device with a DB9 connector.
Use a regular straight cable when connecting this port to a laptop or any other DTE device.
Use a crossover cable (= null modem cable) when connecting the port to another DCE device.

The post SkyWave SG-7100 Simplex Serial Expansion Card, RS232 only appeared first on Satellite World Store Australia.