SRG5-9TE00-1 Addvalue Wideye SABRE Ranger 5000, BGAN M2M

SRG5-9TE00-1 Addvalue SABRE Ranger 5000, BGAN M2M

The “Internet of Things” (IoT) refers to billions of Internet connected devices, ranging from industrial sensors to surveillances equipment, warning or alarm systems and a wide range of measuring devices. Moving from a world of isolated systems – to one where systems communicate with each other and the cloud server – allows companies to make more efficient and productive use of their assets and business processes.

SABRE^™ Ranger 5000 comes with a host of legacy device interfaces, such as built-in GPIOs, analog input port, RS232 and Ethernet ports, where business operations can continue to benefit from bringing both legacy and new equipment together on the same network.

It also comes with a RS485 (Modbus) interface that supports direct connection of multiple sensors without the need of using a separate Remote Terminal Unit (RTU).

The ultra-low idle power consumption (~1W) of SABRE^™ Ranger 5000 terminal allows you to use a small solar panel to power up the system and makes it perfect for providing end-to-end IP connectivity to sites that are off the grid.

The SABRE™ Ranger 5000 is a class 3 BGAN terminal built for long term fixed location outdoor operation.

Performs like any BGAN terminal, but also maintains a continuous, always available network/Internet connection.

Supports devices such as SCADA sensors, and is perfectly suited as a manned or unmanned communications link

Consider the Sabre Ranger 5000 as a low-power, Ethernet port in remote locations.

Industry uses are:

►Utility Smart Grid – Realtime control with less about 1200 millisecond latency.
►Weather, environmental, seismic warning sensors over a wide (global) area.
►Pump/Valve monitoring and control – Access remote devices, screens, parameters.
►Asset Monitoring – Trigger Switches, Door open, motion detector, alarm send information.
►Remote Video Surveillance – 448 Kbps speeds allow for fast refresh-rate of images real-time.
►Credit Card Processing – low power, small profile, make it an alternative to satellite dishes.
►Low or High-Bandwidth SCADA or M2M devices.
►Any remote device that communicates over a standard TCP-IP Internet connection.

Features

• Remote unmanned access – monitor and control assets no matter their location on the globe.
• Simultaneous Voice and Internet communications
• 24 x 7 Always-On capability
• No indoor unit required. Terminal provides Ethernet port and phone port in an exterior location.
• Internet IP connectivity – at speeds up to 384kbps.
• Supports Internet IP, SMS text messaging, Email, Voice, VPN, VoIP.
• IP Watchdog… Internal logic maintains a constant network connection, or the system reboots.
• System Activation/Deactivation via SMS text message.
• NEMA 4X with Ingress Rating IP65 Outdoor door weather rating and corrosion resistant
• Enhanced vibration and shock resistance
• Low power consumption. Normal operation use 4 watts idle, 22 watts burst transmitting.
• Operates in -40°F to 167°F (-40°C to 75°C) – Extreme cold and hot.
• Operates globally(except extreme polar regions) with the same service plan for all continents.
• Connectivity ports – Ethernet (RJ-45) – Plug-and-Play easy.
• Power requirements – 12 Volt (to 15 volt) DC. AC/DC power supply is provided.
• Latency – 800 to 1500ms on average (Standard BGAN Latency).
• Low Profile – Does not attract attention from possible vandalism or theft.
• It is secure from hackers when powerful firewall rules are in place.
• SMS texting control. Hibernate, Activate and other status
• Streaming CIR 1:1 up to 64Kbps.
• Certified CD, FCC, IC, CSA