3501310-0002 Hughes 4500 S-band Satellite Terminal
3501310-0002 Hughes 4500 S-band Satellite Terminal
Short Description:
• S-band satellite operation with data rates up to 200 Kbps forward and 150 Kbps return
• Omnidirectional satellite antenna
• Integrated watchdog to ensure “always-on” network connectivity
• Supports remote terminal management
• Auto-on/auto-context activation
• Includes a 4500 Terminal and a Quick Start Guide
o Accessories (cables, mounting hardware, etc.) sold separately
With the Hughes 4500 MSS terminal, sites that are otherwise off-grid can be assured of reliable and affordable end-to-end IP data connectivity. The low standby power consumption and weatherproofed integrated Omni antenna makes this hardware perfect for a wide range of fixed and mobile, land and maritime applications seeking high-quality, S-band satellite mobile services.
Introduction
Supporting numerous applications, such as connected vehicles, industrial, fisheries, resource extraction, environmental monitoring, and Smart-Grid monitoring, the Hughes 4500 S-band terminal offers advantages across many industries and is highly suited to power-challenged locations that rely upon solar-battery arrays with sensitive power budgets.
The installation is highly convenient, consisting of a single 4500 unit that can be placed at the end of a single cable carrying Ethernet and power. The SIM card is then mounted securely inside the 4500 unit. The terminal is environmentally sealed for long-term outdoor installation on a fixed site or a moving vehicle, even including small boats.
Features of the Hughes 4500 S-band Terminal
- S-band satellite operation
- Omni directional antenna
- Designed for mobile operations
- Integrated watchdog to ensure “always-on” network connectivity, with no manual intervention required to recover from an outage
- Supports remote terminal management
- Auto-on and auto-context activation automatically restores power and connection, following any network issues or total loss of power
- Low power consumption
- Simple installation; no PC required
- Terminal can be vehicle-, pole-, or mag-mounted
- Weatherproof, integrated omni antenna element
- Built-in GNSS receiver
Interfaces
- Ethernet connection
- Nominal 12V power
- USB for connection to configuration PC
- SIM connector under cover
- Serial data and GPIO options
Package Contents
- Hughes 4500 terminal
- Quick Start Guide
Accessories
- Connection cables
- Vehicular-, pole-, or mag-mounting kits
- Extended warranty options
Technical Specifications
- SAT Transmit Freq: 1995–2010 MHz
- SAT Receive Freq: 2185–2200 MHz
- GNSS Support: GPS, GLONASS
- Terminal Weight: 1.2kg
- Terminal Dimensions: 257 X 178 X 114 mm
- Operating Temp: -25 to +65 °C
- Storage Temp: -40 to +80 °C
- Humidity: 95% RH at 40 °C
- Terminal Mobility Speed: Up to 120 km/h
- Wind loading: Survival: 200 km/h
- Water and Dust: IP67
- Input Voltage” +9V to +28v DC
- Firmware Upgrades: Over the air or local
- Power Consumption:: Transmit: <15W. Receive: < 8W. Idle: <1W. Off (Remote switch control): 10mW
