407224A-950 Sailor Flush Mount Bracket, for the 7222 and 6222 VHF Control Unit
In stock
$140.80 Inc. GSTSailor 7222 is GMDSS Compliant Exceeding standards set by IMO regulation for GMDSS Class A VHF
4759102 Starlink Standard Gen3, Wall Mount Only
In stock
Compatible with Starlink Standard Kit, and works with a 4″ overhang or less.
4759103 Starlink Standard Gen3, Pipe Adapter, Only
In stock
The Starlink Standard Pipe Adapter is designed to attach to any existing pole. Minimum diameter of 31 mm (1.25 in) and a maximum diameter of 50.8 mm (2 in). Only for use with metal pipe, NOT for PVC or plastic based pipes.
500752 Satcube Tent, COTP Protective Cover from Inclement Environment
In stock
$2,227.50 Inc. GST
51-100233 Lars Thrane LT-300 GNSS, Roof Mount only
In stock
$130.90 Inc. GSTThe LT-300 GNSS receiver meets all standards and certification requirements needed for worldwide maritime navigation equipment.
51-100234 Lars Thrane LT-300 GNSS, Pole Mount only
In stock
$130.90 Inc. GSTThe LT-300 GNSS receiver meets all standards and certification requirements needed for worldwide maritime navigation equipment.
6019_A-KIT Intellian OneWeb Mount Adapter Kit, includes OW6034 for Pedestal/Pole/Mast )Maritime) (Maritime)
In stock
$1,362.90 Inc. GST
67-150411 Sailor 3027C mini-C Bulkhead Mount Kit
In stock
$209.00 Inc. GSTBracket ONLY for: Sailor 3027C mini-C Antenna
91-100771 Lars Thrane Bracket Mount, for Control Units
In stock
$178.20 Inc. GST91-100771 Compatibility: All LT-31xx, 41xx, 42xx Systems
91-100772 Lars Thrane Flush Mount, for Control Units
In stock
$196.90 Inc. GST91-100772 is Compatible with: All LT-31xx, 41xx, 42xx Systems
The LT-3110S Control Unit must be mounted with either the Bracket Mount, Control Unit
(P/N: 91-100771) or Flush Mount, Control Unit (P/N: 91-100772)
The Flush Mount, Control Unit is not included in the LT-3100S GMDSS Satellite
Communications System – Basic (P/N: 90-102071) and must be ordered separately.
Mounting and installation considerations:
For optimum system performance, the following guidelines on where to install and mount the LT-3110S Control Unit must be followed. It is recommended to mount the unit in a location, which fulfils these requirements:
• Mount the unit indoor (not exposed to direct water)
• Mount the unit using either the bracket mount or flush mount
• Mount the unit on a rigid structure with a minimum of exposure to vibration and shock
• Mount the unit in an area with an ambient temperature between -15°C to +55°C (+5°F to +131°F)
91-100774 Lars Thrane Pole Mount, 1.5in(?38.8mm), for Antenna
In stock
$232.10 Inc. GSTThe Pole Mount 1.5in pipe(Ø38.8mm), Antenna Unit only supports a 1.5in(Ø38.8mm) pipe(outside diameter).
The pinot or grub screw (antenna and pole lock) torques are specified in the user installation guide. The pole mount is made of milled aluminum (black anodized).
The pinot screws(or grub screws) are made of A4 stainless steel.
91-102469 Lars Thrane Pole Bracket Mount, 1.5-2.5in pipe(?38.8-63.5mm), w/ Cable Hose, for Antenna
In stock
$217.80 Inc. GST
91-102470 Lars Thrane Cable Hose for Antenna, protective enclosure
In stock
$107.80 Inc. GSTThe cable hose consists of a UV resistant silicone tube and an aluminum anodized thread block, which can be fastened to the LT-xxxx Antenna Unit providing protection to the coaxial cable N connector and surroundings.